Classic / B-3256-32E-MOD

Modular

Floor Plan

Floor Plan Description

The Classic / B-3256-32E-MOD built by Legacy Housing is a 3-bedroom, 2-bathroom doublewide modular home with 1,602 square feet on a 52-foot frame. A tiled kitchen with an island and a combined dining area fill the lower left, with a utility room above it and a pantry beside it. The owner’s bedroom, bath and walk-in closet sit across the back center, the living room opens at the front, and two bedrooms take the right end, one with a walk-in closet.
Share This Home
Bedrooms 3
Bathrooms 2.00
Square Feet 1602
Width 30' 8"
Length 52' 0"
Sections 2
Stories 1
Style Ranch

3D Tour

No 3d Tour Available

Floor Plan Specifications

Floor Decking: Tongue & Groove O.S.B. Deck
Floor Joists: 2x6 Floor Joist 16" O.C.
Insulation (Floors): R11
Insulation (Walls): R11
Insulation (Ceiling): R21
Dormer: Dormers per Print on Doublewides
Front Door: Factory-Select 34" Steel In-Swing Front Door with Deadbolt
Rear Door: Rear Door with Deadbolt
Roof Pitch: Singlewides: 30-Gauge Steel Metal Roof - 4/12 Pitch / Doublewides: Composition Shingle Roof - 3/12 Pitch
Siding: Vinyl Siding (or Metal on Singlewides at no charge)
Window Type: Aluminum Vertical Slider Windows
Safety Alarms: Smoke Detectors Throughout
Vaulted Ceilings: Singlewides: 8' 8" at-Peak Vaulted Ceilings Throughout / Doublewides: 9' 0" at-Peak Vaulted Ceilings Throughout
Window Treatment: Mini-Blinds Throughout
Window Type: Aluminum Vertical Slider Windows
Interior Doors: Raised Panel Interior Doors with Metal Knobs
Electrical Service: 200-AMP Total Electric
Water Heater: 30-Gallon Electric Water Heater
Bathroom Flooring: Glued-Down Tile Flooring
Kitchen Sink: Stainless-Steel Kitchen Sink
Kitchen Lighting: Dual-Bulb Fluorescent Light
Kitchen Flooring: Glued-Down Tile Flooring
Offered By
Florida Homes Direct
18235 Hwy 331 S
Freeport, FL 32439
Legacy Housing - Eatonton, GA
Proudly Built By
Please note:

All sizes and dimensions are nominal or based on approximate builder measurements. The builder reserves the right to make changes due to any changes in material, color, specifications, and features anytime without notice or obligation.