Classic / 1684-32B

ManufacturedModular

Floor Plan

Floor Plan Description

The Classic / 1684-32B built by Legacy Housing is a 3-bedroom, 2-bathroom singlewide manufactured modular home with 1,256 square feet on a 84-foot frame. The living room is the centerpiece of the middle, with a combined area and a dining room tucked beside the angled kitchen island. The owner’s bedroom, its bath and a utility room occupy the left end, while the right end holds two bedrooms and a hall bath.
Share This Home
Bedrooms 3
Bathrooms 2.00
Square Feet 1256
Width 16' 0"
Length 84' 0"
Sections 1
Stories 1
Style Ranch

3D Tour

No 3d Tour Available

Floor Plan Specifications

Exterior Wall Studs: 2 x 4
Floor Decking: tongue & groove OSB
Floor Joists: 2 x 6
Insulation (Floors): 11
Insulation (Walls): 11
Insulation (Ceiling): 21
Dormer: Dormers per Print on Doublewides
Front Door: Factory-Select 34" Steel In-Swing Front Door with Deadbolt
Rear Door: Rear Door with Deadbolt
Roof Pitch: Singlewides: 30-Gauge Steel Metal Roof - 4/12 Pitch / Doublewides: Composition Shingle Roof - 3/12 Pitch
Siding: Vinyl Siding (or Metal on Singlewides at no charge)
Window Type: Aluminum Vertical Slider Windows
Safety Alarms: Smoke Detectors Throughout
Vaulted Ceilings: Singlewides: 8' 8" at-Peak Vaulted Ceilings Throughout / Doublewides: 9' 0" at-Peak Vaulted Ceilings Throughout
Window Treatment: Mini-Blinds Throughout
Window Type: Aluminum Vertical Slider Windows
Interior Doors: Raised Panel Interior Doors with Metal Knobs
Electrical Service: 200-AMP Total Electric
Furnace: 200 AMP
Water Heater: 30-Gallon Electric Water Heater
Bathroom Flooring: Glued-Down Tile Flooring
Kitchen Sink: Stainless-Steel Kitchen Sink
Kitchen Refrigerator: name brand
Kitchen Lighting: Dual-Bulb Fluorescent Light
Kitchen Flooring: Glued-Down Tile Flooring
Offered By
Homes To Go
8917 Jacksboro Hwy
Lakeside, TX 76135
Legacy Housing - Fort Worth, TX
Proudly Built By
Please note:

All sizes and dimensions are nominal or based on approximate builder measurements. The builder reserves the right to make changes due to any changes in material, color, specifications, and features anytime without notice or obligation.